Mehdi Ramezani; Reza Rezaei Sokht Abandani
Abstract
To study the effects of priming on seed germination traits of sainfoin 'Eski', a factorial in randomized complete block design with three replications was conducted at the laboratory of agricultural research center of Sari in 2011. Treatments consisted of polyethylene glycol (PEG6000) at 5 and 10%, potassium ...
Read More
To study the effects of priming on seed germination traits of sainfoin 'Eski', a factorial in randomized complete block design with three replications was conducted at the laboratory of agricultural research center of Sari in 2011. Treatments consisted of polyethylene glycol (PEG6000) at 5 and 10%, potassium nitrate (KNO3) at 5 and 10% and potassium chloride (KCl) at 5 and 10% levels and 6, 12 and 24 hours of treatment duration. The most significant interaction of time × priming vigor, root length and germination rate was achieved by priming solution containing PEG 10% for 12 hours. The highest germination percentage and total number of seedlings was achieved by 5 and 10% PEG for 6 and 12 hours and the least with a solution of KCl 10% for 6 hours, respectively. The highest shoot length and seedling length was obtained at PEG 10% for 12 hours and the least at KCl 10% for 24 hours. The highest and lowest number of normal seedlings, were observed by a solution of PEG 10% for 12 hours and KCl 10% for 24 hours, respectively. The highest R/S ratio was obtained in a solution of PEG 5% for 6 hours and the lowest ratio was observed in the solution of KNO3 10%. The lowest weight ratio of R/S was obtained in a solution of KNO3 and KCl 10% for 6 and 24 hours and the highest dry weight of R/S in priming with PEG 10% for 12 hours.
Sara Vaziri Kateshori; Mashallah Daneshvar; Akbar Sohrabi; farhad Nazarian Firoz Abadi
Abstract
To evaluate the effects of various levels of phosphorous and foliar application of iron and zinc on grain yield and yield components of chick pea (Ciceraireintinum L.), an experiment was conducted on split plot factorial based on randomized complete block design with three replications during 2010- 2011 ...
Read More
To evaluate the effects of various levels of phosphorous and foliar application of iron and zinc on grain yield and yield components of chick pea (Ciceraireintinum L.), an experiment was conducted on split plot factorial based on randomized complete block design with three replications during 2010- 2011 growth season at the Agricultural College Research Farm, Lorestan University. Factors included phosphorous fertilizer at three levels (P1=0 kg/ha, P2=100 kg/ha, P3=200 kg/ha, soil application) in the main plots. Fe and Zn each at three levels (F1, Z1=0, F2, Z2 = 0.3 and F3, Z3 =0.6 percent, foliar application) were placed in the sub plots. The results showed that P, Fe and Zn levels had significant effects on grain yield, number of pod per m2 and 100 seed weight. Interaction effect of P and Fe was significant on biological yield, grain yield, 100 seed weight and number of pod per m2. Also interaction effect of P and Zn was significant on grain yield. Interaction effects of P, Fe and Zn were significant on grain yield, 100 seed weight and biological yield. The maximum grain yield was obtained from P3F3Z3 treatment with grain yield 1228 kg/ha. It seems P3F3Z3 treatment is optimum amount for chick pea (cultivar ILC482) under the study condition.
Mahmoud Ghorbanzadeh Neghab; Hamid Reza Babaie; Ghorbanali Rassam; Ali Reza Dadkhah; Asghar Khoshnood Yazdi
Abstract
To study the response of yield,yield components,protein and oil content of soybean cultivars to delay in planting in Shirvan region, an experiment was conducted at Research Farm of the Faculty of Agriculture, Shirvan in 2010. In this study, nine soybean cultivars (Habit, Hack, Black Hack, Cencutry, Cloumbos, ...
Read More
To study the response of yield,yield components,protein and oil content of soybean cultivars to delay in planting in Shirvan region, an experiment was conducted at Research Farm of the Faculty of Agriculture, Shirvan in 2010. In this study, nine soybean cultivars (Habit, Hack, Black Hack, Cencutry, Cloumbos, Clark, Sahar, Zane and Willams) were evaluated at different sowing dates (20 May, 4 June and 20 June) in factorial experiment based on randomized complete block design with three replications. The results indicated that yield components, protein content and grain yield significantly reduced by delay planting. The first planting (20 May) had the highest grain yield (2338 kg/ha). There were significant differences between soybean cultivars for grain yield and other traits except oil content. Zane cultivar had the highest grain yield. Sahar cultivar had the lowest grain yield due to the reduced harvest index, increase days to flowering and days to poding. The results indicated that delay in planting causes reduction in grain yield. Zane, Black Hack, and Hack cultivars had the highest grain yield in all planting dates.
Mehdi Ramezani; Reza Rezaei Sokht Abandani
Abstract
To determine the effects of priming and planting density on improvement of morphological and physiological traits of the two hybrid corns SC (S.C. 704) under double cropping in Sari, a split plot experiment as randomized complete block design with four replications was conducted in 2010. Treatments included ...
Read More
To determine the effects of priming and planting density on improvement of morphological and physiological traits of the two hybrid corns SC (S.C. 704) under double cropping in Sari, a split plot experiment as randomized complete block design with four replications was conducted in 2010. Treatments included two densities of 80 and 100 thousand plants per hectare as the first factor and osmopriming of seeds of two hybrids of corn (S.C. 704), with a solution of 10% polyethylene glycol (6000 PEG), 0.5% potassium nitrate (KNO3), 2% potassium chloride (KCl), water (hydropriming) and control (without priming) were considered as the second factor. The results showed that plant height using the priming solution of 10% polyethylene glycol and 100 thousand plants per hectare density was 33 percent higher than 0.5% potassium nitrate and 2% potassium chloride with the density of 80 thousand plants per ha. Also the forage yield per hectare with the density of 100 thousand plants was 14.42% more than 80 thousand density. Best plant density and priming concentration for leaf area index (LAI), crop growth rate (CGR) and net assimilation rate (NAR) were the density of 80 thousand plants per hectare and 10% polyethylene glycol. Therefore, it is concluded that adequate forage yield (54730 kg/ha) of the hybrid corn used in this study were obtained by the density of 100 thousand plants per hectare and 10% polyethylene glycol solution.
Saeideh Maleki Farahani; Daryoush Mazaheri; Mohammad Reza Chaeichi
Abstract
To evaluate the effects of fertilizing and deficit irrigation regimes on some chemical properties of soil and plant, an experiment was conducted during 2007 and 2008 growing seasons. Experimental design was a split plot based on a randomized complete block design with four replications. The treatments ...
Read More
To evaluate the effects of fertilizing and deficit irrigation regimes on some chemical properties of soil and plant, an experiment was conducted during 2007 and 2008 growing seasons. Experimental design was a split plot based on a randomized complete block design with four replications. The treatments consisted of three deficit irrigation regimes (main plots) and six soil fertilizing systems (sub-plots). The irrigation treatments were included non-stressed, medium stress and severe stress. Fertilizing systems consisted of no fertilizing as control, phosphorous and nitrogen biofertilizers, 100% chemical fertilizer, vermicompost, 50% chemical fertilizer + 50% vermicompost, and 50% chemical fertilizer + biofertilizer as the sub plots. Integrated application of chemical and organic fertilizers increased soil P more than the other fertilizing systems. Integrated fertilizers increased plant N in compare with other fertilizing systems. Fertilizers containing vermicompost had more soil organic carbon, nitrogen and phosphorus or plant N and P under water stress rather than the others. Biofertilizer increased soil and plant P content under normal irrigation.
Razie Nabavi Moghadam; Mohammad Hossein Saberi; Mohamad Hasan Sayyari
Abstract
To investigate the effect of different amounts of Fe and Mn on qualitative and quantitative traits of forage maize (Zea mays L.) hybrid single cross 704, an experiment was conducted as a factorial in a randomized complete block design with 16 treatments and three replications at Qaneat city (Southern ...
Read More
To investigate the effect of different amounts of Fe and Mn on qualitative and quantitative traits of forage maize (Zea mays L.) hybrid single cross 704, an experiment was conducted as a factorial in a randomized complete block design with 16 treatments and three replications at Qaneat city (Southern Khorasan Province) in 2010. Treatments consisted of 4 levels of FeSO4 (no fertilizer as control and 30, 60 and 90 kg/ha) and 4 levels of MnSO4 (no fertilizer as control and 10, 20 and 40 kg/ha).With increase of Fe and Mn fertilizers, a significant increase was occurred in plant height, leaf number, stem diameter, dry weight (stem, leaf, maize) and dry forage yield. Increased rates to optimum level (Fe-60 and Mn-20 kg/ha fertilizers according to the soil test), increased the yield, but more fertilizer reduced the quality. Therefore for forage with good quality and quantity, 60 and 20 kg/ha of Fe and Mn fertilizers, respectively is recommended for this area.
Mehdi Abdolahi; Farid Shekari
Abstract
To evaluate the effects of seed priming with salicylic acid on quality and baking traits of wheat flour, cv. Alvand, under different sowing dates, a factorial experiment was conducted on the basis of complete randomized block design. The factors were seed priming with salicylic acid (including untreated ...
Read More
To evaluate the effects of seed priming with salicylic acid on quality and baking traits of wheat flour, cv. Alvand, under different sowing dates, a factorial experiment was conducted on the basis of complete randomized block design. The factors were seed priming with salicylic acid (including untreated seeds or control treatment, 400, 800, 1200, 1600, 2000 and 2400 µM concentrations of salicylic acid) and two sowing dates (23rd of Oct. and 22nd of Nov.). Results showed that priming slightly decreased (less than 1%) protein percent compared to control treatment in both sowing dates. It may be due to positive effects of salicylic acid on seed yield and higher accumulation of starch in seeds compared to protein. On the other hand, priming enhanced Zeleny number and loaf volume. Wet gluten, gluten index and seed yield increased by application of seed priming. This was higher in second sowing date compare to the first sowing date. In addition, higher concentrations of salicylic acid lead to more increment in measured parameters.
Seyed Shahram Shafiye; Hasan Mohammad Alizade; Hossein Moghadam; Ali Reza Yousefi
Abstract
To study the effect of different weed control methods in tomato, an experiment was conducted as completely randomized block design with three replications at the research farm of University of Tehran (Karaj) in 2008. The treatments consisted of post emergence (at recommended rate) or pre emergence (reduced ...
Read More
To study the effect of different weed control methods in tomato, an experiment was conducted as completely randomized block design with three replications at the research farm of University of Tehran (Karaj) in 2008. The treatments consisted of post emergence (at recommended rate) or pre emergence (reduced rate in combination with mulch) application of metribuzin, rimsulfuron and sulfosulfuron, and also different binary combinations of these herbicides which applied post or pre emergence (in combination with mulch), metribuzi+haloxyfop-methyl, trifluralin+metribuzin, and also mulch alone, weed free and weedy checks. Traits such as weed density and biomass, tomato fruit yield and biomass were evaluated. The results showed that only post emergence application of sulfosulfuron (92%), sulfosulfuron+rimsulfuron (93%) controlled bindweed effectively. However, all herbicide treatments provided good (more than 80%) to excellent (more than 90%) control of redroot pigweed, smooth pigweed and common purslane. Tomato response to rimsulfuron, sulfosufuron and mtribuzin consisted of chlorosis in new terminal growth that recovery occurred after 4 weeks. The results suggest that acceptable control of different weed species in tomato could be obtained by pre-emergence application of rimsulfuron, sulfosufuron and metribuzin in combination with either mulch or post-emergence herbicide.
Mohammad Reza Moradi Talavat; Ataallah Siadat
Abstract
To investigate wheat and wild mustard growth and competition to N levels, an experiment was conducted in Ramin Agriculture and Natural Resources University of Khouzestan, located at 36 km North of Ahvaz. Treatments included planting wheat solely, wild mustard solely, and intercropping wheat and wild ...
Read More
To investigate wheat and wild mustard growth and competition to N levels, an experiment was conducted in Ramin Agriculture and Natural Resources University of Khouzestan, located at 36 km North of Ahvaz. Treatments included planting wheat solely, wild mustard solely, and intercropping wheat and wild mustard in pots. These combinations were exposed to N levels including 0, 60, 120 and 180 kg.ha-1. The results showed that grain yield, dry matter and spike number of wheat increased by increased N levels in sole crop treatment. These traits decreased by N levels when competing against wild mustard. Wheat grain and total protein content increased up to 120 kg N.ha-1 by increased N levels, but decreased while competing against wild mustard. The highest N apparent recovery by wheat was obtained from sole cropping of this crop and 120 kg N.ha-1. The lowest rate of this parameter was observed in competition condition against wild mustard and the level of 180 kg N.ha-1. The results showed that wild mustard traits had positive response to increased N levels, regardless to competition against wheat.
Alireza Abdolahpour; Mahmoud Ghasemnejad; Ali Momenpour; Ali Reza Eshkvari
Abstract
In this study, effect of irrigation duration on concentration of some macro and micro nutrient elements in ‘Thompson Navel’ orange leaves grafted on three rootstocks was evaluated as a factorial experiment in completely randomized block design. Factors included rootstocks in three levels ...
Read More
In this study, effect of irrigation duration on concentration of some macro and micro nutrient elements in ‘Thompson Navel’ orange leaves grafted on three rootstocks was evaluated as a factorial experiment in completely randomized block design. Factors included rootstocks in three levels (Poncirus trifoliata, Citrus aurantium and Troyer citrange (Citrus sinensis ´ Poncitus trifoliata)) and irrigation durations in four levels (2, 4, 6 and 8 days). The results showed that rootstocks and irrigation duration can significantly affect scion leaf nutrient elements concentration. With irrigation of two days intervals, the differences among citrus rootstocks for nutrient elements absorption was significant. In two days interval of irrigation (no stress), significantly higher copper concentrations by sour orange, potassium concentrations by poncirus and phosphor, nitrogen, iron and zinc by Troyer citrange rootstocks were absorbed as measured in ‘Thompson Navel’ leaves. In 8 days interval irrigation treatment, significantly higher copper and zinc concentrations by sour orange, nitrogen and potassium concentrations by poncirus and phosphor by troyer citrange rootstocks were measured in 'Thompson navel' leaf as a scion. Overall, all rootstocks used in this study, that are common citrus rootstocks in the North of Iran, did not show any preference in nutrient element absorption at drought stress conditions.
Ahmad Ershadi; Samira Taheri
Abstract
Frost in early spring is one of the limiting factors in the production of grape. Chemicals offer useful approach to reduce low temperature-induced damages. Different concentrations of salicylic acid including: 0 (control), 0.5, 1 and 2 mM were sprayed twice on 10 year-old ‘Bidaneh Sefid’ ...
Read More
Frost in early spring is one of the limiting factors in the production of grape. Chemicals offer useful approach to reduce low temperature-induced damages. Different concentrations of salicylic acid including: 0 (control), 0.5, 1 and 2 mM were sprayed twice on 10 year-old ‘Bidaneh Sefid’ grape vines at full bloom stage and changes in leaf soluble carbohydrates, proline and protein levels were measured in the next day morning. Leaf and stem samples were subjected to low temperatures of 0, -2, -4 and -8°C while flower clusters were exposed to temperature of 0, -2 and -4°C for three hours. Salicylic acid at 0.5mM concentration resulted in the highest amounts of soluble carbohydrates while the maximum proline content was observed with 0.5 and 1mM concentrations. Salicylic acid at 2mM concentration caused a decrease in soluble protein level. Salicylic acid, low temperature and their interactions had a significant effect on electrolyte leakage of different tissues. Salicylic acid treatments led to a reduction in electrolyte leakage of stem, leaf and cluster samples, compared to control. It seems that salicylic acid minimizes the negative effects of low temperature with evidence of less membrane damage by up-regulating the accumulation of osmoregulants such as soluble carbohydrates and proline.
Elias Soltani; Afshin Soltani; Mostafa Oveisi
Abstract
There are some computer programs to calculate germination related traits such as Germin which have using problems. The aim of this work was to adjust Germin for calculating germination related traits. Seed aging effects on the seedling emergence was modeled using the optimized Germin. This study was ...
Read More
There are some computer programs to calculate germination related traits such as Germin which have using problems. The aim of this work was to adjust Germin for calculating germination related traits. Seed aging effects on the seedling emergence was modeled using the optimized Germin. This study was conducted based on completely randomized design in a factorial combination of five seeds aging treatments (0, 48, 72, 96 and 144h accelerated aging periods) and 3 levels of environmental factors. Results indicated that Chapman–Richards function adequately described cumulative emergence in all aging treatments and three environmental conditions. Emergence percentage and rate were decreased by seed aging periods from 145 to 194oC day. Results showed that observed thermal time for emergence increased as accelerated ageing periods increased and drought stress resulted in increased thermal time. For example, thermal time increased to 240oC day in 144h accelerated aged seeds in severe drought. Results indicated that with increasing thermal time in optimum condition, thermal time would increase linearly in the drought stress. Optimized program could calculate germination related traits. Therefore, it is recommended to use the optimized Germin in seed science research.
Shirin Dianati; Mohsen Kafi; Masoud Mirmasoumi; Valiollah Mozaffarian; Ali Reza Salami
Abstract
Five different media with two concentrations and kinds of carbohydrates and peptone treatments were examined for their effectiveness in promoting asymbiotic seed germination of Epipactis veratrifolia. Results revealed significant differences between media on seed germination percentage and protocorm ...
Read More
Five different media with two concentrations and kinds of carbohydrates and peptone treatments were examined for their effectiveness in promoting asymbiotic seed germination of Epipactis veratrifolia. Results revealed significant differences between media on seed germination percentage and protocorm growth and Fast medium has the best effect on both. Carbohydrate treatments had significant effect on seed germination percentage but not on protocorm growth. Modified Fast medium with 5gr l-1 fructose and 12 gr l-1 sucrose and 2 gr l-1 peptone (MFH2P2) was the best medium for seed germination (49.6%) and Modified Fast medium with 30 gr l-1 sucrose and 2 gr l-1 peptone (MFH1P2) was the best medium for protocorm growth (17.3 mm). Media, carbohydrate and peptone influence seed germination percentage, while media and peptone alone influence protocorm growth. In addition, use of in vitro culture significantly reduced relatively long period of time which is necessary for seed germination and protocorm plantlets growth in natural conditions (approximately 2 years).
Hamid Rahnemoun; Farid Shekari; Jalil Dejampour; Mohammad Bagher Khorshidi
Abstract
To evaluate morphological and biochemical changes of almond (Prunus dulcis Mill.) under salt stress conditions and determine relationship among accumulation of Na and Cl with these traits, an experiment was conducted based on completely randomized design with four treatments including 0 (control), 25, ...
Read More
To evaluate morphological and biochemical changes of almond (Prunus dulcis Mill.) under salt stress conditions and determine relationship among accumulation of Na and Cl with these traits, an experiment was conducted based on completely randomized design with four treatments including 0 (control), 25, 50 and 75 mM of pure sodium chloride and three replications from 2010 to 2012. The seed of healthy almond genotypes grown in natural saline areas of East-Azerbaijan province were used as the experimental material in this study. Salt treatments were influenced during eight weeks following the growth and appearance of 15 – 20 leaves on each seedling. The results showed that the threshold of marginal leaf scorch symptoms was in relation with an accumulation of 9–11 mg/g DW Na. Also, mean of free proline content increased from 37.7 to 117.9 µmol.g-1 FW linearly and significantly in parallel with the accumulation of Na and Cl in the leaves. Under same conditions, catalase and ascorbate-peroxidase activity increased significantly; however peroxidase activity increased up to 50 mM salinity but decreased subsequently at higher levels of salt.
Peyman Sharifi; Unes Izadpanah; Mohammad Naghi Safarzad Vishekaei; Mohammad Arash Tahmourespour
Abstract
A factorial experiment based on a randomized complete block design with three replications was carried out in order to study the effects of tuber size, nitrogen fertilizer and harvest date on yield and yield components of potato. This experiment was conducted in a grower’s farm in Uraki village ...
Read More
A factorial experiment based on a randomized complete block design with three replications was carried out in order to study the effects of tuber size, nitrogen fertilizer and harvest date on yield and yield components of potato. This experiment was conducted in a grower’s farm in Uraki village located in Chabahar city, in 2011. In this experiment, the treatments were two levels of tuber size (smaller and larger than 35 mm), four levels of nitrogen fertilizer (0, 60, 120 and 180 kg ha-1) and two levels of harvest date (105 and 112 days after emergence). The results of analysis of variance indicated that effects of tuber size, nitrogen rate and tuber size × nitrogen rate interaction effect were significant for all of the studied traits at 0.01 probability level. Effect of harvest date was significant on total tuber yield, number of large tubers, tuber yield and dry matter. The results of this experiment indicated increasing nitrogen up to 120 kg ha-1,increased total tuber number, number of large tubers, tuber yield and dry matter. But using up to 180 kg of nitrogen per hectare reduced these traits. According to the results of this research, it seems that under our experiments condition, tuber size larger than 35 mm, using 120 kg nitrogen per hectare which harvested 112 days after emergence date of tubers (1st of April) produced 41500 kg ha-1 tuber which is suitable to gain the highest yield of tubers for planting the 'Sante' cultivar.